RFID interface waist high bidirectional full automatic stainless steel access control flap gate turnstile manufacturer

Specification:

1. Power Supply: AC220V± 10V, 50Hz / AC110V± 10V, 60Hz
2. Power Consumption: 100W/24V
3. Temperature: -15 to 75 degrees
4. Humidity: < 95%, without concretion
5. Passage Width: 550-600mm
6. Passing Speed: 40 persons/min (normal open), 30 persons/min (normal close)
7. Arm Open/Close Time: 1s
8. Input Interface: +12V electrical signal or impulse signal with width more than 100ms, drive current >10mA
9. Communication Interface: RS485 (Distance: < =1200m)
10. Material: Housing - 304 stainless steel Arm - Plexiglas
11. Dimension: 1200*300*990mm
Arm Length: 260mm
12. Weight: 150kgs

Functions and features:

◊ Smart card reader compatible with a variety of card such as IC and ID card.

◊ can be expanded to automatic identification system, realizing function of access control,

Pedestrian flow control, attendance check or fare collection.

◊ Equipped with international standard electrical interface, can be easily integrated with other

R/W device, also can be controlled and management through remote supervision computer

◊ Equipped with a couple of infrared photocell, alarm at unauthorized entry or tailgating

Attempts, together with anti-strike function to protect pedestrian

◊ LED gate direction indicator that displays the current operational state to pedestrian. Green

Arrow for entry free, Red Cross for passage locked.

◊ Can open the turnstile by two input signals (signals can be input by access controller, button or

Other equipments)

◊ Provide audible sound prompt and information display function.

◊ The flaps will open automatically during power interruption and recover N/C mode after power on (optional)

◊ counting function. Flap closes after passing N pedestrians continuously by swiping card N times

Correspondingly (N<=16) (optional)

◊ Reversed passing alarm function, barrier will alarm if pedestrian pass from opposite direction

After reading the card. (optional)